Lateral spreading in basal reinforced embankments supported by pile-like elements

Bei Dämmen auf wenig tragfähigem Untergrund ist es zwischenzeitlich Stand der Technik, an der Dammbasis eine Bewehrung aus hochzugfesten Geokunststoffen (Gewebe oder Geogitter) einzulegen. Dabei können die Bewehrungslagen direkt auf den weichen Boden oder über Pfahlelementen angeordnet werden, die die Dammlasten in tiefere, tragfähigere Schichten abtragen. Die horizontale Bewehrung an der Dammbasis hat die Aufgabe, die vertikalen Dammlasten und die nach außen wirkenden Spreizkräfte aufzunehmen. Dies ist besonders für bewehrte Tragschichten über Pfählen von großer Bedeutung, da sonst die Pfähle/Säulen eine Biegebeanspruchung erhalten, die sie aufgrund des geringen Durchmessers (oftmals unbewehrt) nicht aufnehmen können. Abgesicherte wissenschaftliche Erkenntnisse über Größe und Verteilung der Spreizspannung in Höhe ober- und unterhalb der Bewehrungslagen liegen derzeit noch nicht vor, aus denen dann auch die Beanspruchung abzuleiten ist, die aus der Spreizwirkung bei der Geokunststoffbemessung zu berücksichtigen ist. Herr Dr.-Ing. Gourge Fahmi hat dafür zunächst den Kenntnisstand zur Spreizbeanspruchung ohne und mit Bewehrung sowie ohne und mit Pfahlelementen zusammengefasst. Ein wesentlicher Teil einer wissenschaftlichen Untersuchungen stellt die Modellversuche in einem relativ großen Maßstab dar, die u. a. auch zur Validierung von numerischen Berechnungen zur Fragestellung vorgesehen waren. Dabei konnte nach gewissen Parameteranpassungen überwiegend eine gute Übereinstimmung zwischen Modellversuchen und FEM-Berechnungen erreicht werden. Lediglich bei den Dehnungen bzw. Zugkräften in den Geogittern über Pfahlelementen ergab die FEM bei dem verwendeten Programmsystem viel zu niedrige Werte. Es wurde dazu in der Arbeit anhand eigener Untersuchungen und Vergleichsergebnissen aus der Literatur eine Hypothese formuliert und zunächst die Berechnungsergebnisse mit einem Faktor angepasst. Mit den durchgeführten Verifikationen stand damit dann ein weitestgehend abgesichertes numerisches Berechnungsmodell zur Verfügung. Aufbauend auf diesen Vorarbeiten konnten Parameterstudien mit numerischen und analytischen Methoden zur Spreizproblematik durchgeführt werden. Dabei wurden die Randbedingungen und Parametervariationen sinnvoll und für die Fragestellung zutreffend gewählt. Die numerischen Verfahren ergaben vertiefte Erkenntnisse zur Mechanik und zum Verhalten der Konstruktion. Die analytischen Vergleichsberechnungen validierten primär die Güte dieser vereinfachten Ansätze für praktische Berechnungen. Zusammenfassend wurde festgestellt, dass erwartungsgemäß die Spreizkräfte im Geogitter nahezu linear mit der Dammhöhe anwachsen. Von besonderer Bedeutung für die Größe der Spreizkräfte ist die Steifigkeit der Weichschichten. Dieser Parameter wird bei den bisher bekannten analytischen Berechnungsverfahren nicht berücksichtigt. Je weicher der Untergrund, je größer wird das Verhältnis zwischen Spreiz- und Membranbeanspruchung. Eine steilere Dammböschung hat erwartungsgemäß ebenfalls eine höhere Spreizwirkung zur Folge. Des Weiteren ergeben sich bei mehrlagigen Geogittern die höheren Beanspruchungen in der unteren Lage aus dem Membraneffekt und in der oberen Lage aus dem Spreizeffekt. Zu diesen Erkenntnissen wurden in der Arbeit erste Vorschläge für die praktischen Bemessungen gemacht, die aber noch weiter zu optimieren sind. Schließlich erfolgt von Herrn Fahmi eine Betrachtung der Pfahlelementbeanspruchung aus Pfahlkopfverschiebung und Biegemomenten. Dabei wurde ersichtlich, dass die Pfahlelemente bei hohen Dämmen erhebliche Beanspruchungen erhalten können, wenn relativ weicher Untergrund vorhanden ist, und es zeigt die Notwendigkeit entsprechend abgesicherter Bemessungsverfahren auf.

Diverse mariner-like elements in fig wasps

Mariner transposable elements are widespread and diverse in insects. We screened 10 species of fig wasps (Hymenoptera: Agaonidae) for mariner elements. All 10 species harbour a large diversity of mariner elements, most of which have interrupted reading frames in the transposase gene region, suggesting that they are inactive and ancient. We sequenced two full-length mariner elements and found evidence to suggest that they are inserted in the genome at a conserved region shared by other hymenopteran taxa. The association between mariner elements and fig wasps is old and dominated by vertical transmission, suggesting that these 'selfish genetic elements' have evolved to impart only very low costs to their hosts.

Sequence analysis and distribution in Salmonella enterica serovars of IS3-like elements

The genome of Salmonella enterica serovar Enteritidis was shown to possess three IS3-like insertion elements, designated IS1230A, B and C, and each was cloned and their respective deoxynucleotide sequences determined. Mutations in elements IS1230A and B resulted in frameshifts in the open reading frames that encoded a putative transposase to be inactive. IS1230C was truncated at nucleotide 774 relative to IS1230B and therefore did not possess the 3' terminal inverted repeat. The three IS1230 derivatives were closely related to each other based on nucleotide sequence similarity. IS1230A was located adjacent to the sef operon encoding SEF14 fimbriae located at minute 97 of the genome of S. Enteritidis. IS1230B was located adjacent to the umuDC operon at minute 42.5 on the genome, itself located near to one terminus of an 815-kb genome inversion of S. Enteritidis relative to S. Typhimurium. IS1230C was located next to attB, the bacteriophage P22 attachment site, and proB, encoding gamma-glutamyl phosphate reductase. A truncated 3' remnant of IS1230, designated IS1230T, was identified in a clinical isolate of S. Typhimurium DT193 strain 2391. This element was located next to attB adjacent to which were bacteriophage P22-like sequences. Southern hybridisation of total genomic DNA from eighteen phage types of S. Enteritidis and eighteen definitive types of S. Typhimurium showed similar, if not identical, restriction fragment profiles in the respective serovars when probed with IS1230A.

The role of prophage-like elements in the diversity of Salmonella enterica serovars

The Salmonella enterica serovar Typhi CT18 (S. Typhi) chromosome harbours seven distinct prophage-like elements, some of which may encode functional bacteriophages. In silico analyses were used to investigate these regions in S. Typhi CT18, and ultimately compare these integrated bacteriophages against 40 other Salmonella isolates using DNA microarray technology. S. Typhi CT18 contains prophages that show similarity to the lambda, Mu, P2 and P4 bacteriophage families. When compared to other S. Typhi isolates, these elements were generally conserved, supporting a clonal origin of this serovar. However, distinct variation was detected within a broad range of Salmonella serovars; many of the prophage regions are predicted to be specific to S. Typhi. Some of the P2 family prophage analysed have the potential to carry non-essential "cargo" genes within the hyper-variable tail region, an observation that suggests that these bacteriophage may confer a level of specialisation on their host. Lysogenic bacteriophages therefore play a crucial role in the generation of genetic diversity within S. enterica. (C) 2004 Elsevier Ltd. All rights reserved.

The rulB gene of plasmid pWW0 is a hotspot for the site-specific insertion of integron-like elements found in the chromosomes of environmental Pseudomonas fluorescens group bacteria

The rulAB operon of Pseudomonas spp. confers fitness traits on the host and has been suggested to be a hotspot for insertion of mobile elements that carry avirulence genes. Here, for the first time, we show that rulB on plasmid pWW0 is a hotspot for the active site-specific integration of related integron-like elements (ILEs) found in six environmental pseudomonads (strains FH1–FH6). Integration into rulB on pWW0 occurred at position 6488 generating a 3 bp direct repeat. ILEs from FH1 and FH5 were 9403 bp in length and contained eight open reading frames (ORFs), while the ILE from FH4 was 16 233 bp in length and contained 16 ORFs. In all three ILEs, the first 5.1 kb (containing ORFs 1–4) were structurally conserved and contained three predicted site-specific recombinases/integrases and a tetR homologue. Downstream of these resided ORFs of the ‘variable side’ with structural and sequence similarity to those encoding survival traits on the fitness enhancing plasmid pGRT1 (ILEFH1 and ILEFH5) and the NR-II virulence region of genomic island PAGI-5 (ILEFH4). Collectively, these ILEs share features with the previously described type III protein secretion system effector ILEs and are considered important to host survival and transfer of fitness enhancing and (a)virulence genes between bacteria.

Mariner-like elements in Rhynchosciara americana (Sciaridae) genome: molecular and cytological aspects

Two mariner-like elements, Ramar1 and Ramar2, are described in the genome of Rhynchosciara americana, whose nucleotide consensus sequences were derived from multiple defective copies containing deletions, frame shifts and stop codons. Ramar1 contains several conserved amino acid blocks which were identified, including a specific D,D(34)D signature motif. Ramar2 is a defective mariner-like element, which contains a deletion overlapping in most of the internal region of the transposase ORF while its extremities remain intact. Predicted transposase sequences demonstrated that Ramar1 and Ramar2 phylogenetically present high identity to mariner-like elements of mauritiana subfamily. Southern blot analysis indicated that Ramar1 is widely represented in the genome of Rhynchosciara americana. In situ hybridizations showed Ramar1 localized in several chromosome regions, mainly in pericentromeric heterochromatin and their boundaries, while Ramar2 appeared as a single band in chromosome A.

The protist Trichomonas vaginalis harbors multiple lineages of transcriptionally active Mutator-like elements

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Chromosomal mapping of two Mariner-like elements in the grasshopper Abracris flavolineata (Orthoptera: Acrididae) reveals enrichment in euchromatin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transposition burst of mariner-like elements in the sequenced genome of Rhodnius prolixus

Transposable elements (TEs) are widespread in insect´s genomes. However, there are wide differences in the proportion of the total DNA content occupied by these repetitive sequences in different species. We have analyzed the TEs present in R. prolixus (vector of the Chagas disease) and showed that 3.0% of this genome is occupied by Class II TEs, belonging mainly to the Tc1-mariner superfamily (1.65%) and MITEs (1.84%). Interestingly, most of this genomic content is due to the expansion of two subfamilies belonging to: irritans himar, a well characterized subfamily of mariners, and prolixus1, one of the two novel subfamilies here described. The high amount of sequences in these subfamilies suggests that bursts of transposition occurred during the life cycle of this family. In an attempt to characterize these elements, we performed an in silico analysis of the sequences corresponding to the DDD/E domain of the transposase gene. We performed an evolutionary analysis including network and Bayesian coalescent-based methods in order to infer the dynamics of the amplification, as well as to estimate the time of the bursts identified in these subfamilies. Given our data, we hypothesized that the TE expansions occurred around the time of speciation of R. prolixus around 1.4 mya. This suggestion lays on the Transposon Model of TE evolution, in which the members of a TE population that are replicative active are present at multiple loci in the genome, but their replicative potential varies, and of the Life Cycle Model that states that when present-day TEs have been involved in amplification bursts, they share an ancestral copy that dates back to this initial amplification.

Light regulation of type IV pilus-dependent motility by chemosensor-like elements in Synechocystis PCC6803

To optimize photosynthesis, cyanobacteria move toward or away from a light source by a process known as phototaxis. Phototactic movement of the cyanobacterium Synechocystis PCC6803 is a surface-dependent phenomenon that requires type IV pili, cellular appendages implicated in twitching and social motility in a range of bacteria. To elucidate regulation of cyanobacterial motility, we generated transposon-tagged mutants with aberrant phototaxis; mutants were either nonmotile or exhibited an “inverted motility response” (negative phototaxis) relative to wild-type cells. Several mutants contained transposons in genes similar to those involved in bacterial chemotaxis. Synechocystis PCC6803 has three loci with chemotaxis-like genes, of which two, Tax1 and Tax3, are involved in phototaxis. Transposons interrupting the Tax1 locus yielded mutants that exhibited an inverted motility response, suggesting that this locus is involved in controlling positive phototaxis. However, a strain null for taxAY1 was nonmotile and hyperpiliated. Interestingly, whereas the C-terminal region of the TaxD1 polypeptide is similar to the signaling domain of enteric methyl-accepting chemoreceptor proteins, the N terminus has two domains resembling chromophore-binding domains of phytochrome, a photoreceptor in plants. Hence, TaxD1 may play a role in perceiving the light stimulus. Mutants in the Tax3 locus are nonmotile and do not make type IV pili. These findings establish links between chemotaxis-like regulatory elements and type IV pilus-mediated phototaxis.

Sequence analysis and distribution in Salmonella enterica serovars of IS3-like elements

The genome of Salmonella enterica serovar Enteritidis was shown to possess three IS3-like insertion elements, designated IS1230A, B and C, and each was cloned and their respective deoxynucleotide sequences determined. Mutations in elements IS1230A and B resulted in frameshifts in the open reading frames that encoded a putative transposase to be inactive. IS1230C was truncated at nucleotide 774 relative to IS1230B and therefore did not possess the 3' terminal inverted repeat. The three IS1230 derivatives were closely related to each other based on nucleotide sequence similarity. IS1230A was located adjacent to the sef operon encoding SEF14 fimbriae located at minute 97 of the genome of S. Enteritidis. IS1230B was located adjacent to the umuDC operon at minute 42.5 on the genome, itself located near to one terminus of an 815-kb genome inversion of S. Enteritidis relative to S. Typhimurium. IS1230C was located next to attB, the bacteriophage P22 attachment site, and proB, encoding gamma-glutamyl phosphate reductase. A truncated 3' remnant of IS1230, designated IS1230T, was identified in a clinical isolate of S. Typhimurium DT193 strain 2391. This element was located next to attB adjacent to which were bacteriophage P22-like sequences. Southern hybridisation of total genomic DNA from eighteen phage types of S. Enteritidis and eighteen definitive types of S. Typhimurium showed similar, if not identical, restriction fragment profiles in the respective serovars when probed with IS1230A.

Genetic features and molecular epidemiology of Enterococcus faecium isolated in two university hospitals in Brazil

The global emergence of vancomycin-resistant Enterococcus faecium (VREfm) has been characterized by a clonal spread of strains belonging to clonal complex 17 (CC17). Genetic features and clonal relationships of 53 VREfm isolated from patients in 2 hospitals in Ribeirao Preto, Sao Paulo, Brazil, during 2005-2010 were determined as a contribution to the Brazilian evolutionary history of these nosocomial pathogens. All isolates were daptomycin susceptible, vancomycin-resistant, and had the vanA gene. The predominant virulence genes were acm and esp. Only 5 VREfm isolated in 2005-2006 had intact Tn1546, while 81% showed Tn1546 with deleted left extremity and insertion of IS1251 between the vanS and vanH genes. Multilocus sequence typing analysis permitted the identification of 9 different sequence types (STs), with 5 being new ones (656, 657, 658, 659, and 660). Predominant STs were ST412 and ST478, all belonging to CC17, except ST658. This is the first report of the ST78 in Brazil. (c) 2012 Elsevier Inc. All rights reserved.

Caracterização e diversidade molecular do transposon Tn1546, carreador do gene vanA, responsável pela expressão de resistência à vancomicina, em amostras clínicas de diferentes espécies de Enterococcus

Enterococcus resistentes à vancomicina (VRE) são reconhecidos como importantes patógenos causadores de infecções nosocomiais, configurando um grave problema de saúde pública, principalmente pela escassez de opção terapêutica eficaz. O fenótipo de resistência VanA é o mais frequente, sendo definido pela resistência a altos níveis de vancomicina e teicoplanina. VanA é caracterizado por um conjunto gênico (vanRSHAXYZ) localizado no elemento genético móvel denominado transposon Tn1546. A diversidade de Tn1546 resulta de alterações estruturais promovidas por deleções ou integração de sequências de inserção (IS) que, exercem papel chave na evolução do elemento VanA, modificando os aspectos relacionados à sua transferência e expressão do fenótipo. O objetivo deste estudo foi caracterizar e avaliar o polimorfismo de elementos Tn1546 presentes em amostras de diferentes espécies de Enterococcus isoladas em instituições hospitalares do Estado do Rio de Janeiro no período de 2000 a 2012. Foram incluídas neste estudo 70 amostras VRE que foram caracterizadas quanto ao gênero, espécies e genótipo de resistência aos glicopeptídeos por métodos convencionais e PCR multiplex. A susceptibilidade a 17 antimicrobianos foi avaliada pelo método de difusão em ágar, e concentração inibitória mínima (CIM) para vancomicina e teicoplanina foi determinada por microdiluição em caldo. O tranposon foi obtido após lise das células bacterianas e amplificação por PCR longo, utilizando-se oligonucleotídeos específicos para a região repetida e invertida que flanqueia este elemento genético. A diversidade dos elementos Tn1546 foi avaliada por um conjunto de métodos moleculares que incluiu a análise do polimorfismo do tamanho de fragmentos de restrição (restriction fragment lenght polymorphism, RFLP), utilizando-se a endonuclease ClaI, amplificação de segmentos internos por PCR de sobreposição de oligonucleotídeos (overlapping PCR) e detecção de sequências de inserção (ISs). A caracterização em espécies considerada para as demais análises foi obtida pela metodologia de PCR de acordo com a seguinte distribuição: E. avium (N=6), E. faecalis (N=12), E. faecium (N=46), E. gallinarum (N=4) e E. raffinosus (N=2). Todas as amostras apresentaram o genótipo vanA. Nos testes de susceptibilidade aos antimicrobianos foi observado que todas as amostras foram multirresistentes, sendo resistente de 6 a 13 dentre os 17 antimicrobianos testados. A presença de elementos semelhantes ao arquétipo de Tn1546 foi observada em 61,5% das amostras; entretanto, 27 amostras apresentaram perfis variantes de Tn1546. Foram identificados nove perfis de RFLP, dentre 66 avaliadas, sendo o perfil I, prevalente e semelhante ao arquétipo de Tn1546. Não foi possível analisar quatro amostras por RFLP. Os produtos de amplificação de Tn1546 alterados, obtidos pela overlapping PCR e pelo rastreamento de IS, levaram à classificação de 15 tipos polimórficos, nomeados de A a O. A maioria dos Tn1546 polimórficos teve suas regiões de ORF1 e/ou ORF2 deletadas; e IS1542 juntamente com IS1216V foram as inserções mais frequentes, que em muitas situações compartilhavam a mesma região de inserção. IS19 foi detectada apenas na região vanS-vanH. Os dados apresentados neste estudo indicam que o polimorfismo de Tn1546 pode ser explorado no rastreamento de rotas de transmissão, acompanhamento da dispersão de elementos VanA e investigação da evolução de amostras VRE.

The impact of genome defense on mobile elements in Microbotryum

Repeat induced point mutation (RIP), a mechanism causing hypermutation of repetitive DNA sequences in fungi, has been described as a ‘genome defense’ which functions to inactivate mobile elements and inhibit their deleterious effects on genome stability. Here we address the interactions between RIP and transposable elements in the Microbotryum violaceum species complex. Ten strains of M. violaceum, most of which belong to different species of the fungus, were all found to contain intragenomic populations of copia-like retrotransposons. Intragenomic DNA sequence variation among the copia-like elements was analyzed for evidence of RIP. Among species with RIP, there was no significant correlation between the frequency of RIP-induced mutations and inferred transposition rate based on diversity. Two strains of M. violaceum, from two different plant species but belonging to the same fungal lineage, contained copia-like elements with very low diversity, as would result from a high transposition rate, and these were also unique in showing no evidence of the hypermutation patterns indicative of the RIP genome defense. In this species, evidence of RIP was also absent from a Class II helitron-like transposable element. However, unexpectedly the absolute repetitive element load was lower than in other strains.